Master Scanning and
3D Printing in Your Clinic
TWO DAY IMMERSIVE HANDS-ON DIGITAL DENTISTRY COURSE
DAY 1 LECTURE OUTLINE
- How to scan a full arch in under 45 seconds.
- How to scan for implants, aligners, full arch and splints.
- How to troubleshoot issues if your lab work doesn't fit.
- 5 key things to check once your scan is complete.
- Everything you need to know about 3D printing in dentistry.
- Which 3D printer you should buy based on your clinic's needs and budget.
- Key tips and tricks when 3D printing in a dental clinic for maximum ROI.
DAY 2 HANDS-ON OUTLINE
- Learn how to design and 3D print models with or without hinges.
- Learn how to design and 3D print a splint.
- Learn how to design and 3D print a surgical guide.
- Learn how to design and 3D print a temporary and permanent restorations.
- Understand everything you need to know about in-house printing of aligners.
- Complete overview of the best in class resins for each clinical indication.
Plus more!
Read the full course outline below.
Printers available as part of the hands-on training
- Straumann P20+
- NextDent LCD1
- more to be announced ...
Course Sponsors
Your ticket entitles you to bring 1 team member.
If you would like to bring more of your team, please complete your purchase and then contact support@instituteofdigitaldentistry.com
The Ideal Course for Dentists Looking to Take Their Scanning and 3D Printing to the Next Level
Not confident using digital dentistry?
In our 10+ years of teaching dentists how to use intraoral scanners and other digital dentistry equipment, we’ve seen many reasons for falling back on traditional techniques:
- Unfamiliar with the technology.
- Don’t know how to transition to a fully digital workflow.
- Were given surface-level training that doesn’t translate to clinical success.
- Don’t have time to train their team and just use what they’re comfortable with.
The hard truth is that in order to maintain an efficient practice, you have to utilise new technology as it becomes available.
Otherwise, you’re offering suboptimal care, and your patients will look for a dentist that is confident in using a wide range of technology to treat their needs.
Learn everything you need to know to implement intraoral scanning and 3D printing in your dental clinic
Master Scanning and 3D Printing in Your Clinic is for anyone who wants to get started with intraoral scanning and 3D printing but isn't sure where to begin.
You will learn everything you need to know to become completely proficient in intraoral scanning and 3D printing - in a range of clinical scenarios.
You’ll learn how to scan full arches within 45 seconds, all the clinical tips and tricks to do this, and how to train your team so you can focus on running your clinic.
On top of all this, you will also learn about the next big thing in dentistry - 3D printing.
We will go over everything you need to know on how to implement 3D printing in your practice, the different ways to achieve a high return on investment, and all the different types of printers and their pros and cons.
Master Scanning and 3D Printing in Your Dental Clinic Outline
DAY 1
Intraoral Scanning Lecture
3D Printing Lecture
DAY 2
Hands-on Training Day
- Learn how to design and 3D print models with or without hinges.
- Learn how to design and 3D print a splint.
- Learn how to design and 3D print a surgical guide.
- Learn how to design and 3D print a temporary and permanent restorations.
- Understand everything you need to know about in-house printing of aligners.
- Complete overview of the best in class resins for each clinical indication.
3D PRINTERS YOU'LL USE
- Straumann P20+
- NextDent LCD1
- more to be announced ...
Stay ahead of the curve and elevate your practice with the future of digital dentistry
Your ticket entitles you to bring 1 team member (DA/Nurse/Practice Manager).
If you would like to bring more of your team, please complete your purchase and then contact support@instituteofdigitaldentistry.com
After enrolling in this course, you will gain a wealth of knowledge that will transform your dental practice.
Becoming a master at intraoral scanning will:
- Allow you to treat more patients faster.
- Introduce the “wow” factor to your clinic and help you retain patients.
- Reduce stress in your clinic and increase confidence in yourself.
- Allow you to move away from messy impressions and digitise your patient records.
Implementing 3D printing in your clinic will:
- Help you move your workflow in-house.
- Give you more control over your entire workflow.
- Allows you to print various restorations, such as temporary restorations, All-on-X restorations, and full arch crown restorations.
- Save you massive amounts on your lab bill.
Just how much money could you save by implementing 3D printing?
Try our handy calculator and find out!
NightGuards and Splints
Surgical Guides
Check Out the Feedback From Our Previous attendees
Click to play
Ahmad really knows his stuff, he's enthusiastic and that really is quite infectious.
"This course has, really given me a lot of confidence, but it's massively exceeded my expectations. Ahmad really knows his stuff, he is really asbolutely on it, and he's enthusiastic, and that really, is quite infectious. It's been, it's been a really good day."
"This is the way dentist is going, right, and if you don't get on board now, you're just gonna get left behind and you need someone who has already been down this road."
Click to play
I've gone to two courses in the last 10 years that have changed my life. This is one of them!
"I got dragged into digital dentistry kicking and screaming. I bought a scanner just about threw it out the window in the first week. My office manager found this course and I thought, why not?
I've already invested this much in it. I've gone to two courses in the last 10 years that have changed my life. This is one of them.
Can't more highly recommend it. If you've got a scanner, you need to do this course, that's it. "
Click to play
it's good to be able to get that knowledge in, so you can be confident when you are using it.
I just have to do this course because I'm new and I wanted to make sure that I've, you know, I cover everything, that I need to know because it's hard to find the time to learn, I came across this course and it's been great.
Enrol in Master Scanning and 3D Printing in Your Clinic
Learn the secrets that will take your dental practice to the next level
Your ticket entitles you to bring 1 team member (DA/Nurse/Practice Manager).
If you would like to bring more of your team, please complete your purchase and then contact support@instituteofdigitaldentistry.com
Sydney Course Location
VENUE: Sheraton Grand Sydney Hyde Park Hotel
You are fully protected by iDD’s Satisfaction Guarantee
We’re so confident that this course will give you the tools and confidence needed to implement scanning and printing in your clinic that if you take the course and find that it hasn’t enabled you to improve your scanning and printing in your clinic successfully, we’ll give you your money back.
No questions asked.
Meet Your Digital Dentistry Educators
Dr Ahmad Al-Hassiny is a driven and passionate dentist who has a strong focus on the digital workflow. He is the director of the Institute of Digital Dentistry and a global KOL for almost every scanner company.
Dr Ahmad is fortunate to adopt CAD/CAM and digital dentistry very early on in his dental career which has allowed him to focus on developing his skills in this field. He understands the benefits of digital dentistry and how this can positively change daily dental practice. He is a global leader in digital dentistry and intraoral scanners and is one of the few in the world who has tested all mainstream scanners and CAD/CAM systems in his clinic.
Jeroen Klijnsma is a European trained Dental Technician, Digital Specialist and global speaker with extensive experience in 3D manufacturing, like printing, milling and digital workflows.
Collaborating with industry leading manufacturers, allowing him to be up to date with the latest technologies and materials. His dental laboratory and consultancy/training centre in Melbourne is fully digital and houses some of the most used and unique 3D printers of the world.
Being a certified 3Shape trainer, KOL for several brands and having owned and operated multiple labs in Europe and Asia, he can support you with the latest workflows and innovating trends that are upcoming.
Watch Dr Ahmad Al-Hassiny in action!
Here’s what dentists are saying about our previous training
Our courses help dentists gain confidence with intraoral scanners.
We strive to ensure you succeed in digital dentistry.
Dr Shirlyn Sutedia
General Dentist - AUS
Confidence to do more.
It’s been so beneficial. I’ve learnt that I could do so much more. I had only been doing single crown restorations. I was scared to do anything else. But iDD has given me the confidence I need to do so much more.
Dr Kennith Lau
General Dentist - AUS
Unbiased training.
This course offers an unbiased overview of many different systems. If you want to get into CAD/CAM and you don’t know where to start, this is the place.
Dr Vivek Panwar
General Dentist - NZ
Up-skill and learn digital dentistry
I recommend these courses to everyone who is looking to up-skill their day to day practice and learn digital dentistry.
Have a question about the course?
This course is fully in-person.
Absolutely! This course is designed for dentists who want to learn how to use intraoral scanning and 3D printing to enhance their clinical workflows and offer more advanced treatment options to their patients.
We will start with the basic fundamentals and gradually approach more complicated clinical scenarios throughout the day.
The course is for one day, starting at 9:00 am and finishing at 5:00 pm, with lunch and food breaks throughout the day.
We are happy to discuss payment plans or provide documentation for you to claim the course as an education expense.
Please contact support@instituteofdigitaldentistry.com
Yes! Digital and hard copies of CPD certificates are supplied at the conclusion of the course.
Not at all. We will walk you through everything you need to know.
Dr Ahmad’s presentation style is extremely engaging and as such, he loves to ask and take questions from the audience. You will have more than enough time to ask any questions specific to your clinic.
You are more than welcome to bring your own intraoral scanner and laptop to follow along, however, there won’t be any hands-on training in this course.
Your ticket entitles you to bring 1 team member.
If you would like to bring more of your team, please contact support@instituteofdigitaldentistry.com
To Summarise:
This is a 2-day immersive course featuring a hands-on day and a lecture day.
You'll learn everything you need to know to implement 3D printing and intraoral scanning in your clinic.
You'll learn from a key-opinion leader - Dr Ahmad Al-Hassiny - who has extensive experience using these technologies in his clinic.
You're fully protected by iDD's Satisfaction Guarantee if you aren't able to implement scanning and printing in your clinic with the strategies taught in the course.
Join our mailing list
Sign up to receive product updates and special offers from our team.
© 2024 Institute of Digital Dentistry, all rights reserved.