Live Patient Predictable
Implant Surgery for Beginners
Full Digital Workflow.


2-Day Live Surgery, Hands-On Implant Training
Full Digital Workflow: Implant Planning and Guided Placement
Wellington, New Zealand

  • Do you want to start providing your patients with an alternative method to replace a missing tooth other than conventional bridges or plates?
  • Want to learn how to make Implant Surgery predictable minimising risks of wrong placement
  • Want to learn how to take a CBCT (Cone Beam X-Ray) and Diagnose accurately to avoid surgical complications.
  • Understand Implant Planning and Learn How to 3D Print Guides In-House
  • You will Create a Same-Day Accurate Implant Guide without Waiting for Labs!
  • Get Hands-On LIVE Patient Experience placing implants using an implant guide you created with supervision from experienced clinicians.

One of a Kind Training in Implant Dentistry


In this course you will learn the entire digital workflow to plan and place an implant accurately on live patients. Learn from over 10 Years of Implant Surgical Experience with Dr Hamid Al-Hassiny in this unique course in which you will go through the entire workflow including Intraoral Scanning, CBCT, Implant Planning, Implant Guide Design, 3D Printing, and Guided Implant Placement.

Taking a CBCT X-Ray and how to read, diagnose and use the CBCT in Implant Planning
Implant Planning using 3Shape Implant Studio
Design and Fabricate an Implant Guide using Formlabs Form 2 3D Printer
drill-open-mouth-impant-surgery-guide-3d-printed-guided-surgery-nobel-biocare-institute-of-digital-dentistry

During this Live Patient Training you will be taught key aspects of Implant Planning and Placement including:

  • Key Surgical Principals in Implant Surgery
  • How to take a Full Mouth Digital Impression/Scan with the 3Shape TRIOS Intraoral Scanner
  • Taking a CBCT X-Ray and how to read, diagnose and use the CBCT in Implant Planning
  • Implant Planning using 3Shape Implant Studio
  • Design and Fabricate an Implant Guide using Formlabs Form 2 3D Printer
  • Predictable Surgical Placement of an Implant using the Guide on Live Patients
  • Minor Gingival and Bone Grafting as the case allows 

One on One Training

You will be mentored by experienced dentists who will guide you clinically and give you real world feedback and insights into Implant Dentistry.

Live Patient Hands-On

You will apply everything you are taught about Implant Surgery in a Real Clinic Setting with patients provided for you to practice.

Advance Faster

Learn from clinicians with thousands of hours of Implant and Digital Dentistry experience so you can fast-track your learning within 2 days.

This course focuses on comprehensive CPD rather than placing many implants blindly. We are here to teach you the entire digital workflow and to carefully understand Implant Planning and Surgical Guidelines. By the end of the course you will be involved in the placement of at least 4 implant fixtures and you will have a strong grasp of implant theory, planning and surgical placement.


Course Outline


Day One

  • Lectures on implant placement and theory

  • Hands-On Full Mouth TRIOS Scanning on a Live Patient

  • Taking a CBCT on a Live Patient 

  • Interpretation of CBCT and key considerations

  • Implant Planning using 3Shape Implant Studio

  • Implant Guide Design using 3Shape Implant Studio

  • Implant Guide Fabrication using FormLabs 3D Printer

Day Two

  • Lecture on Implant Surgery and Key Considerations

  • Lecture on Flap design, Suturing and Soft tissue manipulation

  • Supervised Implant Surgeries using Fabricated Guides from Day One

  • Attendees will work in pairs, taking turns at assisting and therefore each attendee will be involved in the placement of at least 4 implants.

  • Gingival grafting and bone grafting as the cases allow

  • Placement of Healing Abutments/Cover Screws

Patients will be provided and have been pre-assessed for suitability by Dr Hamid.
Surgical kits and equipment for the placement of dental implants and all dental instruments/consumables will be provided

Time Until Early Bird Rate Ends:

00
Days
00
Hours
00
Minutes
00
Seconds

Course Dates

Course Dates 2020 

To Be Confirmed

Patients Provided

Course Info

Small Group Training​

​All Materials Included

Location Wellington, New Zealand

​​

Course Cost

Two Days of Live Patient Hands-On Implant Training

$4895 NZD + GST
Early Bird Rate: $4595 + GST

Register your interest below for the 2020 Course


If you are looking to compliment this training a Same-Day Implant Restoration Course will be carried out 4 Months after this course and anyone attending this course will have first preference.


Learn how to create aesthetic and perfect fitting CAD/CAM Implant Restorations In-House on the same-day.

What Dentists are saying


What do our past course attendees think of our training?

State of the art practice, equipment and one on one training. The introduction to multiple popular CAD/CAM systems in use by the whole team was commendable. I highly recommend Institute of Digital Dentistry.

profile-pic
Dr Renuka Garineni General Dentist

I recommend these courses to everyone who is looking to up-skill their day to day practice and learn CAD/CAM.

profile-pic
Dr Vivek Panwar General Dentist

This is a course I can recommend to any dentist wanting to know how and where to start with CAD/CAM. I know the journey of CAD/CAM continues to develop and evolve and I know the iDD will be right there beside it!

profile-pic
Matt Brown Ivoclar Territory Manager

Amazing courses, the best way to see multiple different digital scanning and milling systems in action. I can’t recommend the Institute of Digital Dentistry highly enough for dentists interested in starting digital dentistry.

profile-pic
Dr Amelia Paterson General Dentist

A Highly RECOMMENDED course unique to New Zealand. The Institute of Digital Dentistry presented by Hamid Al-Hassiny and his sons, Ahmad and Haidar all have great CHARACTER. COMMENDATION to a well balanced informative lecture base and hands-on touch. An ENDORSEMENT to an unbiased, peer to peer family approach. Digital Scan, Design, Mill in one appointment is the future, so DO NOT get left behind.

profile-pic
Anton Martin

Unbiased and pragmatic approach to CAD/CAM dentistry designed for GDPs by GDPs. Great niche and I am greatly looking forward to more courses.

profile-pic
Dr Akash Kota General Dentist

It’s been so beneficial. Not only do you get to learn how to do everything, but you get exposure to all the different systems. I’ve learned that I could do so much more. I had only been doing single crown restorations. I was scared to do anything else, just because of time pressure. But iDD has given me the confidence I need to do so much more.

profile-pic
Dr Shirlyn Sutedia General Dentist

There are no courses in NZ that understand and embrace the future of dentistry quite like Dr Ahmad and his staff at iDD. Nothing like a course where you can learn to scan, design, mill and even glaze your own CAD/CAM restorations using many different systems! Dr Ahmad spares nothing in order to achieve the greatest results in dentistry and it is evident in both the equipment and the knowledge he has acquired in his practicing career. He holds nothing back and I feel like I have come out of the course not only confident that I would be able to do this in the mouth but also a better clinician. 5/5 would recommend

profile-pic
Dr Kenny Kim General Dentist

I do definitely recommend these courses. It gives you a really good summary of all the CAD/CAM systems including TRIOS and CEREC, different types of mills and materials, so you get a good overview that’s unbiased.

profile-pic
Dr Paul Bui General Dentist

Knowing which machine to use when, whether one machine is going to be too slow or not accurate enough… it’s a minefield out there. If you’re on the fence [about iDD], you need to jump in and do it, because at the end of the day, dentistry is all going digital. Everything coming out now is digitally-based. It looks so much better, and it’s nicer for patients. So, if you want to be giving patients the best treatment, you need to get onto the course and have all the experience you can to take that to your practice.

profile-pic
Dr Alexandra Booth General Dentist

The course was an eye-opener for me, as it was held in a real clinical environment. I really loved the way the course was held, enthusiasm from the speakers and energetic staff. Dr Hamid and his sons were all about sharing knowledge about digital dentistry and encouraging the participants of the course.

profile-pic
Dr Nath Chilukuri General Dentist

Dr Hamid and the team are without a doubt leaders in the field of CAD/CAM and Digital Dentistry. There is no better place to learn CAD/CAM than the Institute of Digital Dentistry. The dentists here use the technology daily in the practice and this shows in the courses which was an excellent learning experience.

profile-pic
Dr Gurpinder Singh General Dentist

This course offers an unbiased overview of many different systems. If you want to get into CAD/CAM and you don’t know where to start, this is the place.

profile-pic
Dr Kennith Lau General Dentist

The course was great. It’s been good to try out the new scanners to see what the new mills can do. The team is really enthusiastic, and I’d certainly recommend this course to anyone who would like to see what you can do with CAD/CAM dentistry.

profile-pic
Dr Derek Grey General Dentist

I am grateful for your expert knowledge which you have passed on to make my digital workflow much more efficient from scanning to milling and maintenance. A very well structured course.

profile-pic
Dr Jason Koo General Dentist

Time Until Early Bird Rate Ends:

00
Days
00
Hours
00
Minutes
00
Seconds

Course Dates

Course Dates 2020 

To Be Confirmed

Patients Provided

Course Info

Small Group Training​

​All Materials Included

Location Wellington, New Zealand

​​

Course Cost

Two Days of Live Patient Hands-On Implant Training

$4895 NZD + GST
Early Bird Rate: $4595 + GST

Register your interest below for the 2020 Course


If you are looking to compliment this training a Same-Day Implant Restoration Course will be carried out 4 Months after this course and anyone attending this course will have first preference.


Learn how to create aesthetic and perfect fitting CAD/CAM Implant Restorations In-House on the same-day.

Meet the experts in Digital Dentistry

Dr Hamid Al-Hassiny
Digital Dentist and CAD/CAM Educator

Dr Hamid Al-Hassiny has been practising dentistry in New Zealand for over twenty years. He runs a state of the art 8-chair dental practice in Wellington, New Zealand and is dedicated to utilising the most advanced dental technology.

Dr Hamid has been placing dental implants for over 10 years. He is accredited by the ICOI. Over this time he has placed more than 1000 implants. He has advanced experience with multiple different implant systems including Biohorizons, Nobel Biocare, Neoss and Straumann. Dr Hamid is an early adopter of CAD/CAM and digital dentistry and has been using this technology for many years for in-house implant planning and guide fabrication. He has advanced experience in both guided and freehand implant surgery. 

Upon completing this fundamental course, you will gain an in-depth understanding of each implant dentistry and have extensive hands-on experience in the practical application of guided implant surgery.


Dr Ahmad Al-Hassiny is a driven and passionate dentist who has a strong focus on the digital workflow. Graduating from the University of Otago in 2015 with First Class Honours and being awarded many clinical and Research prizes, he has continued his pursuit of excellence in dentistry.

Dr Ahmad is fortunate to adopt CAD/CAM and digital dentistry very early on in his dental career which has allowed him to focus on developing his skills in this field. Dr Ahmad understands the benefits of digital dentistry and how this can positively change daily dental practice. He has carried out and has been involved in many aspects of complex dentistry including CAD/CAM full mouth rehabilitation and digital smile design. 

Dr Ahmad will be assisting participants in the CAD side of implant surgery including Full Mouth Scanning, Guide Planning and Fabrication using 3D Printers.

Dr Ahmad Al-Hassiny
Digital Dentist and CAD/CAM Educator


Course Location

Institute of Digital Dentistry
9 Hillary Court, Lower Hutt, Wellington, New Zealand

The course is held in our own modern 8-chair dental clinic. This allows you to practice implant placement in a real-life clinic environment. The entire digital workflow is carried out within dental surgeries and we will explore the equipment we use daily in our practice to ensure a smooth workflow. This also allows for practising Intra-Oral scanning on Dental Chairs!

Google Map

Spread the Word
>